Emission Technologies Inc. Laser Cutting Systems

Introduction:

Hello and thanks for your interest in our company and products. Emission Technologies Incorporated is the end result of many years involvement designing and building CO2 Lasers and related equipment. In the early 1980's we started as hobbyists building Flowing Gas CO2 Lasers of our own design. In later years that evolved into various laser cutting systems designed for our own use cutting model airplane parts from plywood and balsa wood. Due to the huge interest we saw from small kit manufacturers that could not afford the astronomically-expensive, commercial laser-cutting systems, we decided to offer an "affordable" laser cutting system as a kit of parts that could be easily assembled by the purchaser. Our goal is to deliver a high quality product that offers unmatched performance and quality. We believe we have achieved this goal and invite you to visit our "Testimonials" section and read some letters from happy customers.

What We Offer:

We are proud to offer Affordable Laser Cutting Systems to Small Business and the Individual Hobbyist. Originally designed for the Model Airplane Manufacturing Industry, our Kit-Built CNC Laser Cutters are now being used for a wide variety of applications including the cutting of Balsa and Plywood, Leather Goods, Acrylics, Dashboard Materials, Foams, Architectural Modeling, and many others. Our High-Quality CNC Cutting System combines State of the Art Precision with a Large Usable Work Area, and is offered at a reasonable cost that is Affordable to Small Business. We manufacture CNC Laser Cutter Kits designed for cutting Wood, Paper, Plastics, Leather, Foam, etc. Our system has a much larger work area than most commercial units and delivers equal or better precision at a fraction of the price. We can do this because we are a small company with little overhead. We manufacture systems custom to order in small batches.

What We Don't Offer:

We do not sell pre-assembled units and have no plans to do so. If you are looking for an off-the-shelf system ready to pull out of the box and plug-in you are in the wrong place... If however you don't mind assembling a system from parts and saving yourself thousands in the process, our products may be for you. We are not a laser job-shop and cannot accept requests to cut your parts for you. We simply manufacture Laser Cutting Systems. Our Laser Systems "Cannot" cut metal and were never designed to do so...